VNCI PT3G Porsche Diagnostic Scanner Compatible with Original Driver
The VNCI PT3G Porsche Diagnostic tool is designed for diagnostic, programming and immobilizer operations on both old and new Porsche models. Compatible with the original Porsche diagnostic system PIWIS software driver, supports the latest PIWIS software and any PIWIS version. It can completely replace the original Porsche diagnostic tool PT3G. VNCI PT3G supports USB connection.
VNCI PT3G Porsche Scanner Features
Note:
Introduction to PIWIS3 diagnostic system
The PORSCHE PIWIS Diagnostics system is used for fault finding diagnostics and code refresh programming of the control unit for Porsche vehicles, and the PIWIS3 TESTER integrates complete diagnostic functions for all Porsche models. PIWIS3 also allows different control units to be read simultaneously, simplifying diagnostics. Ecus can be coded automatically, individually, or from a control table. The PIWIS3 vehicle status record (known as the VAL Protocol - Vehicle Analysis Log) is now automatically registered when the vehicle is in use, during maintenance, and after maintenance has been completed. The PIWIS3 can be used for DC and AC voltage measurement, DC and AC current measurement, diode test, resistance measurement, on/off or open circuit test to show the change of voltage, current and resistance over time, with oscilloscope function.
PIWIS3 Software system Troubleshooting Guide is faster and easier to use. It can display all diagnostic information, initiation procedures, and possible fault sources, and significantly revised "guided fault finding" (GFF) means that repeated repairs (" first fix ") are further reduced. Integrated online teaching function, easy operation, integrated new database, direct access to the Porsche PIWIS workshop technical information system
Piwis3 Other Funcions:
1. Diagnose the application
2. Boot Fault Finding (GFF)
3. Actual value/input signal function
4. Drive link/test function
5. Maintenance/repair function group
6. Coding/programming function group
7. Logging8. filter
9. Application of wiring diagram
Free download VNCI PT3G firmware update tool (PT3G Device Manager)
Supports Porsche PPN online remote, has the latest PIDT engineering database, allows you to code Panamera, Cayenne E3, Taycan and more
Features and specifications of the PIWIS system
Read/clear error codes, capture data flow, computer programming matching, component testing, service information consulting, component field drawing, wiring diagram.
Porsche Piwis Tester IV works with old and latest Porsche cars. It comes with a Panasonic laptop and original test software. The Porsche Piwis Tester IV helps you diagnose and program the latest and old Porsche cars. Examples include the 911(997)(991), Boxster/Cayman(987), 2010-2010 Cayenne, 2011-2011 Cayenne, and Panamera.
The new Panamera can only be diagnosed using the Porsche Piwis Tester IV. According to the current project plan, all early models will be gradually replaced by the new Porsche Piwis Tester IV by the end of 2010. The Porsche PIWIS Tester IV covers all-new Porsche models such as the all-new Panamera 971, Cayenne 9Y0 E3, Panamera 992, Cayman 982 GT4 Clubsport, etc., which do not support the PIWIS II at all. Will not support it in the future.
Support Porsche. Once the early diagnostic procedures are transferred to the Porsche Piwis Tester IV, the Piwis Tester I will no longer be available. When Porsche Piwis Tester IV is distributed, it will include a basic software. This is necessary to start and configure the tester. This system will support Porsche Macan CarPlay activation and PPN online remote support, it does not support Porsche CarPay full screen activation.
Porsche Piwis Tester IV support system
Engine automatic transmission, air conditioning, SRS, ABS, ASR, MPL, GM, original anti-theft system, keyless system, OBDII system.
BGM gateway module online programming
Porsche Tekken Sport software update
The rear/front modules are programmed, new or used depending on the state of the car
Key programming (keys sorted by VIN)
Second-hand ECU CP module is unlocked
Engine control module replacement programming
Transmission module PPN online programming
VTS disable
OEM renovation project PPN coding programming
2019-2022 Sport Chrono Sport plus remote activation of PIWIS4 and 5054A VCI
Each project checks the OEM retrofit wiring diagram, such as 360 Surround view, ACC, AMP
OEM modification remote guide technical support hourly or per VIN login check
OEM Apple CarPlay activation for the Porsche Macan 95B via PPN online
PIWIS 4 System update supports PPN online and PIDT new
Gateway module online programming
Porsche Taycan Sports Software Update
Back/front end module programming
Key programming (key press VIN order)
Used ECU module CP unlock
VTS Disable
OEM retrofit project PPN coding programming
Check the OEM retrofit wiring diagram for each project
OEM retrofit remote guide technical support every hour
Porsche OEM refit, please specify item
OEM Apple CarPlay online activation via PPN
PIWIS3 System update supports PPN online and PIDT new
SMARTPCM Device Suite for PCM Solutions
PCM5 MH2p Full screen CarPlay enabled
PCM5 MH2p Android automatic activation
PCM4/4.1 MHI2 Android Automatic activation
VNCI PT3G vs OEM PT3G vs Custom VAS 615A vs Other PT3G
Package Includes:
1pc x USB cable
1pc x VNCI main unit
When your PIWIS3 software cannot connect to the VNCI PT3G scanner or the original PT3G/PT4G device, your PIWIS3 driver is tampered with or replaced.
You need to restore the original PIWIS3 driver.
The tampered driver needs to be changed back to the PIWIS3 OEM driver.
Restoring the PIWIS3 OEM driver is simple and requires only two steps
Step 1: Replace the driver file
Step 2: Execute the PIWIS OEM Driver Registry
1. Download the original PIWIS OEM driver (the current driver version is v3.5.6)
2. Open the PIWIS3 driver location, delete all files below the location, and copy the original driver file to the location.
PIWIS3 driver location path: D:/PiwisApps/VCI/Actia_64/XS_D_PDU_API_64/
3. Copy the following registry contents to a text file with a.reg suffix, and double-click the file to run it.
Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINESOFTWAREACTIA I+ME GmbHPT3G-VCIModule VersionsXS_D_PDU_API_64] [HKEY_LOCAL_MACHINESOFTWAREACTIA I+ME GmbHPT3G-VCIModule VersionsXS_D_PDU_API_64.5.6] "Image Version"="3.5r06-13787-108" "Image File"="D:/PiwisApps/VCI/Actia_64/XS_D_PDU_API_64/PT3G-VCI-3.5r06-13787-108-20220801" "Module Version"="3.5.6" "Module File"="D:/PiwisApps/VCI/Actia_64/XS_D_PDU_API_64/PT3G-VCI-D-PDU-API-Fw.tgz" "Image Boot Timeout"=dword:0001d4c0 "Update Timeout Default"=dword:00003a98 "Update Timeout Image"=dword:00030d40 "Update Timeout Module"=dword:0000afc8 "Module Name"="D-PDU-API"
4. Finally, connect the VNCI PT3G or the original PT3G/PT4G device, run the ACTIA_D-PDU_API_Tester.exe program, click Start to run, all communication protocols are completely passed, indicating that the original device driver is fully restored to normal, as shown below: