TEST: TECH2 SCANNER CAN FULLY RECORD GM CARD THROUGH TIS2000 OR NOT?
Test: Tech 2 can/cannot fully record GM card through TIS2000?
Today I will share my experience pack software using
Tech 2 rs232 and
TIS2000.
![/tech2-tis2000-review-1](/upload/service/180820155133708068242.jpg)
Today, I will test myself to check if they can not fully record your memory card through TIS2000 software or not, because yesterday I wrote them by the laptop, looking ahead of you, I just want to remove the old soft.
![tech2-tis2000-review-2](/upload/service/180820155133708085097.jpg)
![tech2-tis2000-review-3](/upload/service/180820155133708046873.jpg)
As in my laptop with no DB9 I used the adapter. Also found a Bulletin in which there is an adapter, which recommends itself BOSH.
![tech2-tis2000-review-4](/upload/service/180820155133708065366.jpg)
![tech2-tis2000-review-5](/upload/service/180820155133708069721.jpg)
![tech2-tis2000-review-6](/upload/service/180820155133708098045.jpg)
![tech2-tis2000-review-7](/upload/service/180820155133708042268.jpg)
![tech2-tis2000-review-8](/upload/service/180820155133708038411.jpg)
One photo from the series is not enough, I forgot to do, where the choice of what you want to write to the card, and what it is now.
So someone wrote that his Tech 2 does not see the GM card. The U32 he is the same as U33. If you are sure that you are right.